DNT-ST-01 weight sensor
- Customer pickup,
- Courier
- In detail
1.1 The sensor of a tension of a rope tenzorezistorny-is intended for continuous measurement of static efforts.
1.2. The sensor tenzorezistorny works in the range from 10 to 200 kN and can be used as the sensor of weight, the torque sensor on a rotor, the moment sensor on a machine key and the other weight and dosing systems.
1.3. The output signal of the sensor tenzorezistorny is proportional to effort of a tension of a rope
1.4. Continuous measurement of height of filling with the sensor tenzorezistorny does not depend on physical and chemical properties of environment.
1.5. Explosion protection marking 0ExiallBT5X
Technical characteristics
No. Characteristic Value
1 Range of measurement, kN 10 ÷ 200
2. Working Coefficient of Transfer (WCT), mV / B 1,5
3. The Initial Coefficient of Transfer (ICT) from
RCP at a rated load, % 2,5
4. Supply voltage, Urab, B +12
5. Category of accuracy 0,10
6. Nonlinearity, % ± 0,10
7. Output signal, B 0 ÷ +10
8. Power consumption, MW ≤ 200
9. Resistance of the bridge scheme, Ohm
entrance 380 ± 2,0
output 400 ± 4,0
10. Resistance of isolation, megohm of 1000
11. Diameter of a working rope, mm 10 ÷ 42
12. Range of working temperatures, C-50 ÷ +50
13. Dimensions, mm 280х100х150
14. Weight, kg 6