Technical characteristics
- BrandZitrek
Description
1.1. The chamber jet "110-I-M" is intended for cleaning; removals of a rust, sand and scale; receiving a necessary roughness; removals of layers; matting; hardenings; removals of agnails and polishing, and also for preparation of surfaces before drawing anticorrosive coverings (paints and varnishes, metallizatsionny coverings);
1.2. Productivity of ejector chambers is 1-3 sq.m/hour. Consumption of compressed air - from 0,2 to 1,2 m3/min. (with a pressure of 3,5-7 kg/cm2).
When processing products in ejector chambers light abrasive materials have to be used: (electrocorundum, silicon carbide, etc.) fraction of 0,1-1,2 mm.
1.3. Climatic modification of the UHL 4, GOST 151550-69 and GOST 15543-70 camera;
1.4. The chamber is intended for work in the enclosed space on condition of connection to systems of ventilation;
1.5. Use of a chamber in an explosive environment is not allowed.
2.2. The chamber provides with the required pressure and a consumption of compressed air receiving the cleared surface according to requirements of state standard specification and other normative documents;
2.3. Quality and productivity of abrazivostruyny works considerably depend on pressure and amount of the air passing through a nozzle. The expense and pressure of air depending on diameters snuffled are specified in the table in the passport.
3. Structure of a product and completeness
Piece "110/130-I-M" 1 camera
Jet gun of 1 piece
* Jet nozzle (pine forest carbide) of 1 piece
Hose of supply of abrasive material d = 18 mm 2 rm
Hose of air supply of d = 9 mm 2 rm
Electromagnetic valve of 1 piece
Pedal of management of 1 piece
Trailer switch of 1 piece
Electric control panel of 1 piece
Passport of 1 piece
* ― completeness by request
When processing products in ejector chambers light abrasive materials have to be used: (electrocorundum, silicon carbide, etc.) fraction of 0,1-1,2 mm.
1.3. Climatic modification of the UHL 4, GOST 151550-69 and GOST 15543-70 camera;
1.4. The chamber is intended for work in the enclosed space on condition of connection to systems of ventilation;
1.5. Use of a chamber in an explosive environment is not allowed.
2.2. The chamber provides with the required pressure and a consumption of compressed air receiving the cleared surface according to requirements of state standard specification and other normative documents;
2.3. Quality and productivity of abrazivostruyny works considerably depend on pressure and amount of the air passing through a nozzle. The expense and pressure of air depending on diameters snuffled are specified in the table in the passport.
3. Structure of a product and completeness
Piece "110/130-I-M" 1 camera
Jet gun of 1 piece
* Jet nozzle (pine forest carbide) of 1 piece
Hose of supply of abrasive material d = 18 mm 2 rm
Hose of air supply of d = 9 mm 2 rm
Electromagnetic valve of 1 piece
Pedal of management of 1 piece
Trailer switch of 1 piece
Electric control panel of 1 piece
Passport of 1 piece
* ― completeness by request
TECHNICAL CHARACTERISTICS
Name of the characteristic | Characteristic parameters |
Volume (l.) | 730 |
Productivity (sq.m/h) | from 1 to 3 |
Consumption of air (l/min) | from 200 to 1200 |
Pressure of air (bar) | from 3,5 to 7 |
Overall dimensions (mm) | 1200х1450х1800 |
Weight (kg) | 250 |
Contact the seller
I-m sanding ZITREK KSO-130 camera
We recommend to see